How to set up IPTV?

How to set up IPTV?

Before you configure IPTV, you must download the installation file.If the file has been downloaded earlier, then you must make sure that at the time of installation of the program you have an active internet connection, otherwise you will not be able to use automatic settings, which provides a service provider.

player

Installation Download the installation you must open the file, the Installer window appears.You must select the Russian language and click OK.Then you look at the greeting from the installation program, and click "Next".You will see a list of additional services that can be set, but it is better still to give up additional default services.You need to select the "setting parameters" and remove the checkmark all additional services.Then you need to click "Next".Now the list of programs will appear in front of you, which should be installed by default.It:

  • IP TV Player - how to configure it, you will read below;
  • Modules VideoLAN;
  • shortcut to the main menu;
  • shortcut on your desktop.

If all checkboxes are set, you can press "Next".Now you need to choose a folder where you will need to install the player.If you do not agree with the proposed default path, click "Browse".Then you need to click "Install" and wait until the program is established.As a result of successful completion of the installation of an appropriate message, then you need to click "Finish".

Setting

player Once the program is established, it must be configured.To do this, launch IP TV Plauer from the desktop or from the Start menu.You will be prompted to select a package, for example, the base, but it all depends on your situation.When you choose a package, then click OK.This starts the player window.If it works, the channels are switched, then no further adjustment is not required.Now that you know how to set up IPTV.But if no channels are not there, the reasons for this may be several.

Firstly, the settings must always be spelled out the network card that connects to your ISP, the Ethernet network.However, you may have multiple NICs, while the software automatically selects the first network card.

Second, channels can not occur due to running the VPN-connections, which can be perceived as a player, as a network interface.At the same VPN-connection on top of the local network do not need to turn off.It's all about choosing the network interface.To find out the IP-address of the network card, you can open the "Local Connection Status" or the command prompt, type ipconfig.Remember the address of the IP-card.Then you need to go into the general settings of the player, and check with what is written there.The address must match the one that was written in the command line if it is not, change and restart the player.If the player still does not work, does not display the channels, you will need to get into the advanced settings and check the address of the channel list.You also need to make sure that it is automatically updating the list.

player on

TV Now let's deal with how to set up the TV IPTV.It all depends on the brand and model of the TV, but generally should be present in the TV software and a connection to an Ethernet or Wi-Fi router.If your TV does not have its software, all settings are made through a special set-top box, media player, which will support IPTV broadcast.