How to connect a DVD player to the TV?

How to connect a DVD player to the TV?

After purchasing the DVD - player, the question arises of how to connect it to your TV to be able to enjoy your favorite movies and videos.However, not all so simple, some models are often baffled, and forced to inquire how to connect a DVD player to the TV?

Wire RCA

first step should be to look into the box and find the wires that need to be packaged with a DVD - player.Most often, this RCA cable, which is also called "bells".He's at both ends of the pins are 3 different colors: yellow - video, red and white - audio.When looking at the back side of DVD, there are connectors with similar colors as wire pins.White and red are signed - audio - L - R, and yellow - video.The same connectors you need to find on the TV, they are usually located on the front, back or side.You only need to connect their wires by color, including the relevant video channel on your TV and enjoy watching.


Complete some models of DVD - players find fashionable SCART cable, which represents a connector with 2 rows of contacts inside.Such wire collects in the transmission of audio and video less interference, and the most easy-to-connect, because additional wiring is required.It is necessary to find the corresponding jacks on the TV and DVD - player.In such a connector a DVD, while the two on the television, and one adapted to the incoming signal and one for outbound.To enable them to look out for signs and symbols of the connectors.As a rule, a circle with an arrow inside the need to connect to the incoming and the arrow in the direction of the circle is connected to the outgoing.

S-video output and composite output

Besides the above two ways to connect the DVD - player to a TV, you can stumble upon the S-video output, which would require a special cable.As the name implies, this channel is only for video signal transmission, while additionally will use the "bells" is necessary for the transmission of sound.It is necessary to combine their respective connectors DVD - player and TV and you can enjoy watching.

Another rare method of connection is to connect the composite output.He recalls connection "bells", with the difference that the connectors in this case, there will be five.Typically, the three (green, blue, red) transmit video, while the audio signal is transmitted over two channels.Now that you know how to connect a DVD to a television, and not lose the sight of the wires.