How to flash Lenovo?

How to flash Lenovo?

Watch the video

How to flash Lenovo?

Sometimes when new users are not satisfied with the purchase of the phone, how it functions, as well as some of its programs.In this case, there is a desire to change things and improve on the phone at the program level.Then people begin to look for new programs and ways to get into the phone's software environment.Often they decide to reflash your own phone, but it is not as easy as it seems at first glance.

phone Flashing - a complicated process with a lot of items and requirements, without which nothing happens.So many people can not get to do their own re-flash.For example, Lenovo smartphones flash will not be easy.

consider in more detail how Lenovo smartphones to flash independently.

What you need to start the firmware Lenovo

To start flashing the Lenovo smartphone, you need to observe a few simple rules for success:

  • phone must be charged at least half because the firmware processes on and off the phone consume a lot of battery.
  • Turn off the smartphone and remove the battery.At the first stage we do not need the firmware pack.
  • Download and install special drivers on your computer special regimes.You can find them on the site Lenovo smartphone manufacturer.
  • At the same site producers to download the required version of the firmware on your phone.

After that you can start flashing smartphone.

How to flash smartphones Lenovo:

instructions to flash the Lenovo smartphone, you must follow these instructions:

  1. Extract specific drivers for Lenovo smartphones that enable special regimes, in any folder with the Latin name.
  2. Open Device Manager.
  3. off Connect a smartphone without a battery to a personal computer.
  4. Within 2-3 seconds Manager will show an unknown device.It is necessary to have time to click on it and select in the "Update Driver Software".Specify the folder where we put special drivers.
  5. After installing the drivers in the device manager will show «MediaTek PreLoader USB VCOM Port (COM44)».
  6. After that disable the smartphone from a PC and run the program Flash_tool.exe in UpgradeTool folder.
  7. Program push «Scatter-Loading» and «target_bin» folder select «MT6577_Android_scatter_emmc file.txt ».
  8. then put a tick next to the item «DA DL ALL WITH Cheksum».This tick is important, because the phone will not run without it after the firmware and have everything to do with the first point again.
  9. Click para «Firmware Upgrade» and wait for the end of the test the integrity of files.
  10. After all the manipulations of the program will go into standby mode.You need to connect your phone to the computer with the battery, but off.
  11. firmware process will take a long time.After flashing, you can turn off your smartphone from your computer and turn it on for testing.

If done correctly, the phone can be used.Otherwise you'll have to repeat the process again.

Sometimes the firmware program can not see the phone.Then you need to disconnect it from the computer and connect again after thirty seconds.

Also you can read useful articles from our website How to flash and android How to flash the phone.