How to flash ZTE?
Watch the video
phone in our life plays an integral role practically.Few people can imagine themselves without a potential source of communication.Thanks to the phone while even at a distance, we have somehow closer to each other.And as soon as our phone that something is happening, we immediately feel as "hands-free".This article talk about how to flash the phone ZTE.
apparatus Sew ZTE in several ways, consider the example of CWM application (you can download it on the site androidp1. Ru) for the ZTE Blade.
- To get a quality result of the work done, it is desirable to use a phone device by Gen 2. If you have a device by Gen 1, you need to download the firmware Swedish Spring RLS4b or the CyanogenMod, then the phone off we press key "-" and "on", waiting for the appearance of signs FTM and connect the phone to a computer.Run download_nochecksGen2.exe.and we look forward to a full installation.After that, your phone will receive pursuant to Gen 2.
- then download the required new firmware from the Internet, connect the phone cable to the PC and enter the Recovery using the buttons "-" and "on".
- If the firmware download is not a2sd, the action should start with the below-described points, otherwise you must format the flash by the following: «advanced» - «partition sd - ext = 512, swap = 0, fat».If the flash-card version of the budget, there may be some problems, then try to format it again, or replace.
- then proceeds to action «wipe data / factory reset», «wipe cache partition» or Do the «wipe battery».
- further copy to flash the firmware, but without disclosing it.To the PC was able to see the smartphone in CWM program «mounts and storage» main menu, click on «mount USB storage» and copy everything you need, then click on «unmount».
- then go into Recovery «install zip from sdcard» and deal directly with the installation of firmware.
- After installation click on the «reboot system now» and the phone to reboot.
- After rebooting your phone will be a new firmware.This method is suitable solely for ZTE Blade, and as for the new updates, they can always get through the phone settings.
- If you have done all the items, and the new firmware is not installed on your phone or install correctly, you must repeat the whole procedure again.
About Self phones flashing, see the article How to flash the phone.
ZTE phone Breakdowns occur in the following cases
- Mechanical disorders that can only be eliminated by replacing the parts or their repair.This repair is almost impossible to perform in the home and only requires intervention of the service center.
- replacement firmware.
Why flashing phone?
phone should be flashing in the following four reasons
- Phone ceased to be included.
- constantly rebooted independently.
- phone must be restored from a failed firmware.
- There is a desire to install a newer version of the firmware.
more specific information about the interests of brand phones can be found in the instructions to the phone.