How to glue the carbon film ?

How to glue the carbon film ?

Watch the video

How to glue carbon film?

machine - a special theme for each motorist.All are seeking to improve your car, make it beautiful, unique, and protect against the harmful effects.

In this sense, the latest innovation in the auto market is carbon.This special material consisting of carbon fibers and bonded with epoxy resins.The material is very lightweight and durable, and therefore so popular and expensive.

But there is also a carbon film that retains all the properties of the carbon fiber, and does not require replacement parts.But the material is very dense and unique, and therefore how to glue the carbon film, has its own subtleties.

Key Features

addition to the obvious advantages, the film has its drawbacks.The advantages include a fairly accurate simulation - to determine immediately, carbon fiber or film is rather difficult.Also, the film quite easily glued.But the bad thing is that it is glued on a level surface.So if you want to disguise its irregularities, will not work.You must comply with all rules and regulations, so that the result was really good.

Stage One.Preparatory

  1. machine must be cleaned of all kinds of fats.Perfectly suitable isopropyl alcohol or specially adapted for degreasing agent.
  2. Eliminating irregularities.As mentioned earlier, to ensure that the result is worthwhile, you must first level the surface.To do this, we gruntuem its primer and give to its original state.In addition, more and primer strengthens the adhesive effect, helping the film better stick to the surface of your car.
  3. Warming up large pieces.If you are going to cover the carboxylic film not only small parts (lights, rearview mirror, spoiler), but also large (hood, doors, etc.), they need to warm up before gluing.From warm-up will stretch the film a bit, become more flexible, and therefore better obtyanet great items.But small details, on the contrary, it is not necessary to warm because the heating edges may curl and peel.

Guide: how to glue the film under the carbon

  1. Billet parts.Cut the details should be clearly on a path.For those details, the edges of which will be in constant use, should be left margin of 5-6 cm.
  2. Binding.With a piece of harvested carefully magnets fix it so it does not move.
  3. More accurately, centimeter by centimeter remove the film, gently pressing down her soft roller and running under the surface of the bubbles.
  4. At the edges, joints and places of overlap using sealant.This will help you prevent damage from water and wind, as well as prolong the service carboxylic film.
  5. Completion.Once you have covered under a carbon film all the details that would need to finally warm up the surface of the machine.Use warm special construction adhesive.Particular attention to the edges and creases.Warming will not only strengthen the very film, but also activates the adhesive.The higher the processing temperature, the longer the life of the coating.

That's all the wisdom you need to know to cover car film under the carbon.Ate you still have questions regarding the carbon film and how to glue - video lesson with a clear leadership is required to help you.It can be found at the top of this article.

Successful you achievements and creative ideas!