How to lift the car ?
Watch the video
Every driver knows that the road can happen, anything.To myself somehow secure, you must have a spare tire and a device that can pick up the car.For this purpose, fit the jack, forklift truck, etc.
They come in two types: mechanical and hydraulic.Mechanical divided into lever and parallelogram (folding), and hydraulic - on the lever (podkatnye) and telescopic.
mechanical jacks are equipped with all the Avtozavodskaya cars.Lever Jacks are rare, but the folding abound.Mechanical jacks can lift a car weighing up to 2 tons.They are reliable and easy to use, and take up little space.
to raise a larger car, you must use the hydraulic jack.This load is associated with greater weight of the ram.The telescopic jacks lifting mechanism itself is a hydraulic piston, and in podkatnye gidroporshen acts on lifting arm.
determine the type of jack, be sure to find out the weight of the car, determine its dimensions and a sober assessment of their physical abilities.For example, women should pay attention to small-size hydraulic telescopic jack.Owners of SUVs, minivans and minibuses, as well as employees of service stations is more appropriate podkatnye hydraulic jack.This model has a different lifting height.So, the car weighing 3 tons can be lifted to 390-533 mm.In the more powerful models load up to 5 tons and lifting height - 50 cm.
Using a jack, make sure that your car is securely locked.To prevent its spontaneous movement should include neutral, then put the car on a manual brake and put a brake shoe or a brick, at least under one of the wheels.Working with small parts, be careful, because they have a "habit" to fall under a car.The height of the machine lifting must be the minimum necessary to work, to avoid injury.
Increased clearance (clearance)
Car for current realities, thanks to constantly improving the aerodynamics, which reduces the air resistance becomes faster.This reduces the ride height.Due to the local roads that leave much to be desired, the motorist has to wonder: whether to continue to continue to cling to the bottom of potholes, bumps, or go all the same to the car wash to master increased ground clearance using shims.
To begin to increase ground clearance, think about the impact of the bumper.Many drivers remember when parking in the cities have tall curbs, or gnashing of crunch in case of accidental collision with them.Now modern cars are bumper to "skirt", a width of 2-3 cm. They are necessary for a successful parking.Do not forget about the second option - 12-17 cm below the point of the oil pan, it is essential for small passenger car standards.
Each driver chooses how podnyat car.There are a lot of ways.Consider them.
- The easiest way to replace regular tires on high-profile tires.Many believe it is a quick and painless solution for the chassis.In this case, note the fact that the wheels and tires can not be set higher than those provided by the manufacturer of the machine.
- can replace the shock absorbers that are "addicted", but you can not increase the ground clearance of the machine.
- can also raise the rear part of the car using the rubber supply.They are put in place and allow the standard to keep the weight of the car.So you will not feel uncomfortable in motion on the track.Moreover, it is considered, and the safest solution for the drive and for the design of cars.
- You can also install aluminum spacers between the support and the body of the machine.There is a lot of advantages, among which there is a significant increase in clearance and lack of discomfort when driving.One minus - there are corrosive processes.
This is the most affordable options for increasing the lumen.